Rtl.SDR-RTL funtioniert nicht
Rtl.SDR-RTL funtioniert nicht
Hallo Gemeinde,
wahrscheinlich ein Fehler von mir, habe das Kästchen ausgepackt, SDR-Software runtergeladen, diesen zusätzlichen Za runtergeladen.....die SDR Oberfläche ist drauf, nur keine Verbindung zum eigentliche SDR. Dieser wird als Tastatur erkannt......vielleicht weiß einer Rat, das Ding soll meinen
Sohn etwas für Kurzwelle an seinem Rechner begeistern. Danke vorab schonmal
73 de Frank
wahrscheinlich ein Fehler von mir, habe das Kästchen ausgepackt, SDR-Software runtergeladen, diesen zusätzlichen Za runtergeladen.....die SDR Oberfläche ist drauf, nur keine Verbindung zum eigentliche SDR. Dieser wird als Tastatur erkannt......vielleicht weiß einer Rat, das Ding soll meinen
Sohn etwas für Kurzwelle an seinem Rechner begeistern. Danke vorab schonmal
73 de Frank
-
- Santiago 8
- Beiträge: 946
- Registriert: Di 27. Okt 2015, 08:35
- Standort in der Userkarte: Homburg/Saar
Re: Rtl.SDR-RTL funtioniert nicht
welche SDR-Software benutzt du?
Hast du die ExtIO_RTL2832.dll ins Verzeichnis geladen?
Für Kurzwelle eignet sich der RTL aber nicht, esseidenn, du hast einen Upconverter on Board.
Hast du die ExtIO_RTL2832.dll ins Verzeichnis geladen?
Für Kurzwelle eignet sich der RTL aber nicht, esseidenn, du hast einen Upconverter on Board.
Mache die Dinge so einfach wie möglich, aber nicht einfacher.
- Yeti705
- Santiago 4
- Beiträge: 258
- Registriert: So 19. Jun 2016, 21:09
- Standort in der Userkarte: 57339 Erndtebrück
- Wohnort: 57339 Erndtebrück
- Kontaktdaten:
Re: Rtl.SDR-RTL funtioniert nicht
Hast Du den Treiber mit Zadig erzeugt/installiert? Falls ja, achte bei Zadig drauf, dass der richtige USB-Device ausgewählt ist, bevor Du die Treiberinstallation startest. Evt. stand das einfach nur falsch und die USB-Tastatur war versehentlich angewählt...ist mir beim ersten mal auch passiert, musste schnell gehen, war ungeduldig, hatte nicht richtig geschaut, klickibuntinextfinish...und schon war's daneben
73, Andreas (DO3ANK/Yeti705/13HN573), https://www.yeti705.de
AFU: IC-7300+SM-30, FT-857D+MD-100, FTM-7250D, TYT TH-7800, CRT Micron, GD-77
CB/Freenet/PMR: Grant 2 Premium, SS 3900 Multi, AE6290 Vox, CRT Xenon, Lafayette Urano, Team Mico, TeCom Duo
AFU: IC-7300+SM-30, FT-857D+MD-100, FTM-7250D, TYT TH-7800, CRT Micron, GD-77
CB/Freenet/PMR: Grant 2 Premium, SS 3900 Multi, AE6290 Vox, CRT Xenon, Lafayette Urano, Team Mico, TeCom Duo
Re: Rtl.SDR-RTL funtioniert nicht
Hmm, das mit der Tastatur stimmt. Stecke ich den SDR aus, verschwindet das Gerät. Die Software ist von HDSDR , runtergeladen. Habe den Zugang über Zadig jetzt ungefähr 20x ausprobiert, und wieder runtergeschmissen. Das Licht vom SDR geht an, wenn ich über USB anstecke. RTL 2838 UHIDIR ist die Bezeichnung des Gerätes ( Das als Tastatur in den Geräten erkannt wird) Öffne ich die Benutzeroberfläche kommt NO INPUT SOUNDCARD AVIABLE.
-
- Santiago 8
- Beiträge: 946
- Registriert: Di 27. Okt 2015, 08:35
- Standort in der Userkarte: Homburg/Saar
Re: Rtl.SDR-RTL funtioniert nicht
Nochmal: Hast du die ExtIO_RTL2832.dll ins Verzeichnis geladen?
Mache die Dinge so einfach wie möglich, aber nicht einfacher.
Re: Rtl.SDR-RTL funtioniert nicht
Nein, wo finde ich die?
Re: Rtl.SDR-RTL funtioniert nicht
Hier:
http://hdsdr.de/download/ExtIO/ExtIO_RTL2832.dll
Ins Installationsverzeichnis von HDSDR kopieren.
Was zum Lesen gibts auch:
http://hdsdr.de/RTLSDR_with_HDSDR.pdf
Grüße from Doeskopp
Re: Rtl.SDR-RTL funtioniert nicht
Vielen Dank , Jungs. Mein WE ist gleich rum.....ich werde es die nächsten Tage ausprobieren.
73 de Frank
73 de Frank
- DocEmmettBrown
- Santiago 9+30
- Beiträge: 7616
- Registriert: Sa 3. Jan 2015, 02:37
- Standort in der Userkarte: nein
Re: Rtl.SDR-RTL funtioniert nicht
Kurzanleitung: viewtopic.php?p=492087#p492087
(Den Teil mit HamRadioDeluxe (HRD) läßt Du einfach weg.)
73 de Daniel
(Den Teil mit HamRadioDeluxe (HRD) läßt Du einfach weg.)
73 de Daniel
- Giganto
- Santiago 5
- Beiträge: 309
- Registriert: Do 21. Aug 2008, 02:16
- Standort in der Userkarte: Menzingen
- Wohnort: Zug
- Kontaktdaten:
Re: Rtl.SDR-RTL funtioniert nicht
Das stimmt so nicht ganz..
Der RTL-SDR Dongle V3 kann von 500 kHz – 1766 MHz (500 kHz – 24 MHz in direct sampling mode) eingesetzt werden.
Siehe https://www.google.com/url?sa=t&rct=j& ... 6xIxWFCbP-
Für den Betrieb über ein WebSDR mit der Software von PA3FWM ist hierfür eine umkompilierte Software von rtl_tcp nötig.
Hier wird für den unteren Frequenzbereich zum aktivieren der befehlt rtl_tcp -D 2 vorangestellt. Dies ist jedoch in der gängigen rtl_tcp version nicht vorhanden.
Daher die gepatchte version von PA3FWM benutzen
- WebSDR Nürnberg Skyscraper
- WebSDR Niederhorn Schweiz
- WebSDR Sardinien
- WebSDR Niederhorn Schweiz
-
- Santiago 8
- Beiträge: 946
- Registriert: Di 27. Okt 2015, 08:35
- Standort in der Userkarte: Homburg/Saar
Re: Rtl.SDR-RTL funtioniert nicht
Aber nicht ohne umfangreichen Eingriff/Umbau des Dongels. Das ist schon sehr speziell.
Mache die Dinge so einfach wie möglich, aber nicht einfacher.
- Giganto
- Santiago 5
- Beiträge: 309
- Registriert: Do 21. Aug 2008, 02:16
- Standort in der Userkarte: Menzingen
- Wohnort: Zug
- Kontaktdaten:
Re: Rtl.SDR-RTL funtioniert nicht
Nein... gar kein Einbau/ Umbau. Lies doch mal das PDF Sheet des V3. Dongles
Modified rtl_tcp for direct sampling
The standard version of rtl_tcp only allows for direct sampling on the I-branch, which is useless as we need direct sampling on the Q-branch. This patched version of rtl_tcp (note source files only - requires compilation) kindly provided by Pieter-Tjerk from websdr.org fixes this. Use rtl_tcp -D 2 to activate direct sampling on the Q-branch.Modified rtl_tcp for direct sampling
The standard version of rtl_tcp only allows for direct sampling on the I-branch, which is useless as we need direct sampling on the Q-branch. This patched version of rtl_tcp (note source files only - requires compilation) kindly provided by Pieter-Tjerk from websdr.org fixes this. Use rtl_tcp -D 2 to activate direct sampling on the Q-branch.
Direkt Sampling heisst das Zauberwort
- WebSDR Nürnberg Skyscraper
- WebSDR Niederhorn Schweiz
- WebSDR Sardinien
- WebSDR Niederhorn Schweiz
-
- Santiago 8
- Beiträge: 946
- Registriert: Di 27. Okt 2015, 08:35
- Standort in der Userkarte: Homburg/Saar
Re: Rtl.SDR-RTL funtioniert nicht
Also ich bin da sehr offen, das Thema zu diskutieren, das interessiert mich sehr.
Dieser Abschnitt:
HF direct sampling circuit, diplexed out from the SMA connector
The idea behind direct sampling mode is that an antenna can be connected directly to the ADC pins of the
RTL2832U, and this can enable HF reception. This is useful because the R820T/2 tuner can only tune
down to about 24 MHz at the lowest. On typical R820T RTL-SDR dongles one can enable direct sampling
mode by soldering a wire to the Q-branch pins of the RTL2832U. The RTL2832U samples at 28.8 MHz, so 0
– 14.4 MHz, and 14.4 MHz – 28.8 MHz can be listened to.
The V3 has direct sampling mode implemented in hardware already, so no hardware mods are required
to listen to HF via direct sampling.
To split the HF signal out at the SMA con
Bedingt, dass man ein V3 hat?
Dieser Abschnitt:
HF direct sampling circuit, diplexed out from the SMA connector
The idea behind direct sampling mode is that an antenna can be connected directly to the ADC pins of the
RTL2832U, and this can enable HF reception. This is useful because the R820T/2 tuner can only tune
down to about 24 MHz at the lowest. On typical R820T RTL-SDR dongles one can enable direct sampling
mode by soldering a wire to the Q-branch pins of the RTL2832U. The RTL2832U samples at 28.8 MHz, so 0
– 14.4 MHz, and 14.4 MHz – 28.8 MHz can be listened to.
The V3 has direct sampling mode implemented in hardware already, so no hardware mods are required
to listen to HF via direct sampling.
To split the HF signal out at the SMA con
Bedingt, dass man ein V3 hat?
Mache die Dinge so einfach wie möglich, aber nicht einfacher.
- Giganto
- Santiago 5
- Beiträge: 309
- Registriert: Do 21. Aug 2008, 02:16
- Standort in der Userkarte: Menzingen
- Wohnort: Zug
- Kontaktdaten:
Re: Rtl.SDR-RTL funtioniert nicht
Exakt...der V3 ist ja schon länger im Umlauf...habe auch nur die 3er Versionenheavybyte hat geschrieben: ↑Do 24. Jan 2019, 08:55 Also ich bin da sehr offen, das Thema zu diskutieren, das interessiert mich sehr.
Dieser Abschnitt:
HF direct sampling circuit, diplexed out from the SMA connector
The idea behind direct sampling mode is that an antenna can be connected directly to the ADC pins of the
RTL2832U, and this can enable HF reception. This is useful because the R820T/2 tuner can only tune
down to about 24 MHz at the lowest. On typical R820T RTL-SDR dongles one can enable direct sampling
mode by soldering a wire to the Q-branch pins of the RTL2832U. The RTL2832U samples at 28.8 MHz, so 0
– 14.4 MHz, and 14.4 MHz – 28.8 MHz can be listened to.
The V3 has direct sampling mode implemented in hardware already, so no hardware mods are required
to listen to HF via direct sampling.
To split the HF signal out at the SMA con
Bedingt, dass man ein V3 hat?
- WebSDR Nürnberg Skyscraper
- WebSDR Niederhorn Schweiz
- WebSDR Sardinien
- WebSDR Niederhorn Schweiz
-
- Santiago 8
- Beiträge: 946
- Registriert: Di 27. Okt 2015, 08:35
- Standort in der Userkarte: Homburg/Saar
Re: Rtl.SDR-RTL funtioniert nicht
Mache die Dinge so einfach wie möglich, aber nicht einfacher.